Figure 286 Pae Pvc Counter Command Example - ZyXEL Communications IES-612-51A User Manual

<vpi>
<vci>
This command displays statistics about PPPoA-to-PPPoE PVC activity.
The following example displays the statistics for port 1.

Figure 286 PAE PVC Counter Command Example

ras> adsl paepvc counter 1
pvc 1-1/33
ppp lcp config-request :
ppp lcp echo-request
ppp lcp echo-reply
pppoe padi
pppoe pado
pppoe padr
pppoe pads
pppoe padt
pppoe srvcname error
pppoe ac system error
pppoe generic error
Each value is described below.
tx/rx
ppp lcp config-
request
ppp lcp echo-
request
ppp lcp echo-
reply
pppoe padi
pppoe pado
pppoe padr
pppoe pads
pppoe padt
IES-612-51A User's Guide
Chapter 53 Virtual Channel Management Commands
The VPI of the PAE PVC.
=
The VCI of the PAE PVC.
=
tx
---------------- ----------------
-
: -
: -
: 0
: -
: 0
: -
: 0
: -
: -
: 0
The values in these columns are for packets transmitted (
=
or received ( ) by the IES-612-51A.
rx
The number of config-request PDUs received by the IES-
=
612-51A from the CPE (client) device.
The number of echo-request PDUs received by the IES-612-
=
51A from the CPE (client) device.
The number of echo-reply PDUs received by the IES-612-
=
51A from the CPE (client) device.
= The number of padi PDUs sent by the IES-612-51A to the
BRAS.
The number of pado PDUs sent by the BRAS to the IES-
=
612-51A.
The number of padr PDUs sent by the IES-612-51A to the
=
BRAS.
The number of pads PDUs sent by the BRAS to the IES-
=
612-51A.
The number of padt PDUs sent and received by the IES-
=
612-51A.
rx
0
0
0
-
0
-
0
0
0
0
0
)
tx
395