ZyXEL Communications IES-612-51A User Manual page 265

Table 88 Commands (continued)
CLASS COMMAND
dsnompsd
uscarrier
dscarrier0
dscarrier1
annexl enable
annexl disable
annexl show
annexi enable
annexi disable
annexi show
annexm enable
annexm disable
annexm show
sra enable
sra disable
sra show
pmm enable
pmm disable
pmm show
pmm set
IES-612-51A User's Guide
PARAMETERS DESCRIPTION
Display or set Maximum nominal
<port number>
transmit PSD in the DS direction
[<max nominal
psd>]
Display or set US carrier mask
<port number>
from tone 0 to 63
[<m0> <m1>]
Display or set DS carrier mask
<port number>
from tone 32 to 255
[<m1> <m2> <m3>
<m4> <m5> <m6>
<m7>]
Display or set DS carrier mask
<port number>
from tone 256 to 511
[<m0> <m1> <m2>
<m3> <m4> <m5>
<m6> <m7>]
Turns on the Annex L feature on
<portlist>
the specified port(s).
Turns off the Annex L feature on
<portlist>
the specified port(s).
Displays the Annex L feature
<portlist>
setting for the specified port(s).
Turns on the Annex I feature on
<portlist>
the specified port(s).
Turns off the Annex I feature on
<portlist>
the specified port(s).
Displays the Annex I feature
<portlist>
setting for the specified port(s).
Turns on the Annex M feature on
<portlist>
the specified port(s).
Turns off the Annex M feature on
<portlist>
the specified port(s).
Displays the Annex M feature
<portlist>
setting for the specified port(s).
Turns on Seamless Rate
<portlist>
Adaptation (SRA) ADSL2+ on the
specified port(s).
Turns off SRA ADSL2+ on the
<portlist>
specified port(s).
Displays the SRA ADSL2+ setting
<portlist>
for the specified port(s).
Turns on the Power Management
<portlist> <L2|L3>
feature on the specified port(s).
Turns off the Power Management
<portlist>
feature on the specified port(s).
Displays the Power Management
<portlist>
feature setting for the specified
port(s).
Sets the Power Management
<portlist> <L0|L2>
mode
Chapter 41 Commands Summary
P
H/H
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
M/L
H/H
265