Table of Contents
Advertisement
Chapter 47 IGMP Commands
47.5.1 IGMP Bandwidth Port Disable Command
Syntax:
ras> switch igmpsnoop bandwidth port disable <portlist>
where
<portlist>
This command deactivates multicast bandwidth settings of the specified port.
47.5.2 IGMP Bandwidth Port Enable Command
Syntax:
ras> switch igmpsnoop bandwidth port enable <portlist>
where
<portlist>
This command activates multicast bandwidth setting on the specified port.
47.5.3 IGMP Bandwidth Port Set Command
Syntax:
ras> switch igmpsnoop bandwidth port set <portlist> <bandwidth>
where
<portlist>
<bandwidth>
This command sets the bandwidth allowed for multicast traffic on the specified port(s). It does
not automatically enable it, however.
47.5.4 IGMP Bandwidth Port Show Command
Syntax:
ras> switch igmpsnoop bandwidth port show <portlist>
318
You can specify a single DSL port <1>, all DSL ports <*>
=
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
You can specify a single DSL port <1>, all DSL ports <*>
=
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
You can specify a single DSL port <1>, all DSL ports <*>
=
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
1..100000, in units of kbps
=
IES-612-51A User's Guide
Advertisement
Table of Contents
Troubleshooting
