Chapter 53 Virtual Channel Management Commands
The following example displays the RPVCs for DSL port 1.
Figure 275 RPVC Show Command Example
ras> adsl rpvc show 1
port vpi
---- --- ---- ------------------ --------------- --------------------------
-
1
53.7.7 RPVC Delete Command
Syntax:
ras> adsl rpvc delete <portlist> <vpi> <vci>
where
<portlist>
<vpi>
<vci>
This command removes a PVC for 2684 routed mode traffic.
The following example removes a PVC for 2684 routed mode traffic. It is for DSL port 1, VPI
8, VCI 35.
Figure 276 RPVC Delete Command Example
ras> adsl rpvc delete 1 8 35
53.7.8 RPVC Route Set Command
Syntax:
ras> adsl rpvc route set <port number> <vpi> <vci> <ip>/<netmask>
where
<port number>
<vpi>
<vci>
388
vci ip/netmask
8
35 192.168.10.200/32
The port(s) of the RPVC.
=
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
The VPI of the RPVC.
=
The VCI of the RPVC.
=
The port of the RPVC. Specify a single DSL port <1>.
=
=
The VPI of the RPVC.
The VCI of the RPVC.
=
gateway ip
DS/US vcprofile
192.168.10.102
DEFVAL/DEFVAL
IES-612-51A User's Guide