Igmp Filter Profile Show Command; Igmp Bandwidth Commands; Igmp Bandwidth Default Command; Figure 177 Igmp Filter Profile Delete Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 47 IGMP Commands
This command removes an IGMP filter profile.
The following example removes the voice IGMP filter profile.

Figure 177 IGMP Filter Profile Delete Command Example

ras> switch igmpfilter profile delete voice

47.3.5 IGMP Filter Profile Show Command

Syntax:
ras> switch igmpfilter profile show [<name>|*]
where
[<name>|*]
This command displays an IGMP filter profile's settings.
The following example displays the voice IGMP filter profile's settings.

Figure 178 IGMP Filter Show Command Example

ras> switch igmpfilter profile show voice
-------------------------------------------------------------------------

47.4 IGMP Bandwidth Commands

Use the IGMP bandwidth commands to set up bandwidth budgets for specific multicast
channels.

47.4.1 IGMP Bandwidth Default Command

Syntax:
ras> switch igmpsnoop bandwidth default <bandwidth>
316
The name of an IGMP filter profile or all of the IGMP filter
=
profiles <*>.
profile index
voice 1
voice 2
voice 3
voice 4
voice 5
voice 6
voice 7
voice 8
voice 9
voice 10
voice 11
voice 12
voice 13
voice 14
voice 15
voice 16
startip
224.1.1.10 224.1.1.44
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
IES-612-51A User's Guide
endip