Annex I Disable Command; Dsl Port Statistics Commands; Dsl Port Show Command; Figure 239 Annex I Enable Command Example - ZyXEL Communications IES-612-51A User Manual

Figure 239 Annex I Enable Command Example

ras> adsl annexi enable 5

52.1.23 Annex I Disable Command

This command turns off the Annex I all digital mode feature on the specified ADSL2/2+
port(s).
Syntax:
ras> adsl annexi disable <portlist>
The following example turns off the Annex I feature for port 5.

Figure 240 Annex I Disable Command Example

ras> adsl annexi disable 5

52.2 DSL Port Statistics Commands

Use these commands to display DSL port statistics.

52.2.1 DSL Port Show Command

Syntax:
ras> statistics adsl show [portlist]
where
[portlist]
This command displays DSL port connection statistics including the status (V for enabled, -
for disabled), operational mode, upstream and downstream maximum rates, up time and the
number of errored seconds.
The following example displays connection statistics for DSL port 1.

Figure 241 DSL Port Show Command Example

ras> statistics adsl show 1
port status mode
---- ------ -------- ------------- -------------- ---------------------
1 V
IES-612-51A User's Guide
You can specify a single DSL port <1>, all DSL ports <*> or
=
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
up/downstream
adsl2 512/ 9089 00000:00:04:59
Chapter 52 ADSL Commands
up time error second(15M/24H)
15/15
357