Vlan Enable; Vlan Disable; Vlan Show Command; Figure 160 Vlan Show Command Example - ZyXEL Communications IES-612-51A User Manual

45.5 VLAN Enable

Syntax:
ras> switch vlan enable <vid>
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.

45.6 VLAN Disable

Syntax:
ras> switch vlan disable <vid>
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.

45.6.1 VLAN Show Command

Syntax:
ras> switch vlan show <vlanlist>
where
<vlanlist>
This command shows information about the specified port's VLAN settings.
The following example shows the settings for all VIDs.

Figure 160 VLAN Show Command Example

ras> switch vlan show *
vid name
T:tag
---- ------------------------------- --------------------------------------
1 DEFAULT
enabled
IES-612-51A User's Guide
Chapter 45 IEEE 802.1Q Tagged VLAN Commands
You can specify a single VID: <1>, all VIDs: <*>, a list of
=
VIDs: <1,3>, you can also include a range of VIDs:
<1,5,6~10>.
F:fixed X:forbidden N:normal U:untag
123456789012 12
FFFFFFFFFFFF FF
UUUUUUUUUUUU UU
305