ZyXEL Communications IES-612-51A User Manual page 274

Chapter 41 Commands Summary
Table 88 Commands (continued)
CLASS COMMAND
smcast set
smcast delete
isolation show
isolation enable
isolation disable
isolation
daisychain
isolation
standalone
ip
show
arp show
arp flush
set
gateway
route show
route set
route set
route delete
route flush
ping
statistics
monitor
adsl show
adsl linedata
adsl lineinfo
274
PARAMETERS DESCRIPTION
Use join/leave to add/ remove
<adsl_port> <mac>
multicast MAC addresses on
<join|leave>
specified ADSL ports, a range of
ADSL ports or all ADSL ports.
MAC example: 01005E010203
Removes a static multicast filter
<mac>
entry by deleting the associated
MAC address.
Displays the subscriber isolation
feature's current setting.
Turns the subscriber isolation
feature on.
Turns the subscriber isolation
feature off.
Set switch mode to daisychain
mode
Set switch mode to standalone
mode
Displays the Management IP
[inband|outband]
address settings.
Displays the device's IP Address
Resolution Protocol(ARP) table.
Clears the device's IP Address
Resolution Protocol(ARP) table.
Sets the Management IP address
<ip>[/netmask]
and subnet mask.
Sets the IP address of the
<gateway ip>
device's default gateway.
Displays the routing table.
Adds a routing table entry.
<dst ip>[/netmask]
<gateway ip>
[metric] <name>
Sets the device's default route.
default <gateway
ip> <metric>
Removes a routing table entry.
<dst ip>[/netmask]
Clears the routing table.
Pings a remote host.
<ip> [count]
Displays hardware monitor status. M/L
Displays ADSL port connection
[portlist]
status.
Displays the line data load per
<portlist>
symbol (tone).
Displays the info of the specified
<portlist>
ADSL ports.
P
H/H
H/H
M/L
H/H
H/H
H/H
H/H
M/L
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/~
M/L
M/L
M/L
M/L
IES-612-51A User's Guide