Figure 47 Select Ports - ZyXEL Communications IES-612-51A User Manual

Chapter 13 xDSL Port Setup
Table 19 xDSL Port Setup (continued)
LABEL
Copy Port
Paste
Active
Customer Info
Customer Tel
2+ Features
Profile&Mode
IGMP Filter
Security
Frame Type
Virtual Channels
Alarm Profile
PVID&Priority
Packet Filter
Paste
110
DESCRIPTION
Do the following to copy settings from one DSL port to another DSL port or
ports.
1. Select the number of the DSL port from which you want to copy settings.
2. Select the settings that you want to copy.
3. Click Paste and the following screen appears.
4. Select to which ports you want to copy the settings. Use All to select every
port. Use None to clear all of the check boxes.
5. Click Apply to paste the settings.

Figure 47 Select Ports

Select this check box to copy this port's active setting. This is configured in the
xDSL Port Setting screen (see
Select this check box to copy this port's subscriber information. This is
configured in the xDSL Port Setting screen (see
Select this check box to copy this port's subscriber's telephone number. This is
configured in the xDSL Port Setting screen (see
Select this check box to copy this port's ADSL2+ feature settings. These are
configured in the xDSL Port Setting screen (see
Select this check box to copy this port's port profile settings and ADSL
operational mode. The port profile settings are configured in the xDSL Port
Profile Setup screens (see
mode is configured in the xDSL Port Setting screen (see
page 111).
Select this check box to copy this port's IGMP filter settings. These are
configured in the IGMP Filter Profile screen (see
Select this check box to copy this port's security settings. This is configured in
the Port Security screen (see
Select this check box to copy this port's allowed frame type. This is configured
in the Static VLAN Setting screen (see
Select this check box to copy this port's virtual channel settings. These are
configured in the VC Setup screen (see
Select this check box to copy this port's alarm profile. This is configured in the
Alarm Profile Setup screen (see
Select this check box to copy this port's PVID and priority settings. These are
configured in the VLAN Port Setting screen (see
Select this check box to copy this port's packet filter settings. These are
configured in the Packet Filtering screen (see
See Copy Port.
Section 13.7.1 on page
Section 13.7.1 on page
Section 13.7.1 on page
Section 13.7.1 on page
Chapter 14 on page 125). The ADSL operational
Section 14.8 on page
Chapter 24 on page 185).
Chapter 22 on page
Section 13.9 on page
Section 14.6 on page
Chapter 22 on page
Chapter 20 on page
IES-612-51A User's Guide
111).
111).
111).
111).
Section 13.7.1 on
135).
175).
116).
133).
175).
171).