Table of Contents
Advertisement
Chapter 34 Access Control
Figure 116 Service Access Control
The following table describes the labels in this screen.
Table 77 Service Access Control
LABEL
Return
Services
Active
Server Port
Apply
Cancel
34.6 Remote Management Screen
Use this screen to configure the IP address ranges of trusted computers that may manage the
IES-612-51A.
To open this screen, click Advanced Application, Access Control, Secured Client.
230
DESCRIPTION
Click Return to go back to the previous screen.
Services you may use to access the IES-612-51A are listed here.
Select the Active check boxes for the corresponding services that you want to
allow to access the IES-612-51A.
For Telnet, FTP or web services, you may change the default service port by
typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know
the new port number for that service.
Click Apply to save your changes to the IES-612-51A's volatile memory. The
IES-612-51A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
IES-612-51A User's Guide
Advertisement
Table of Contents
Troubleshooting
