ZyXEL Communications IES-612-51A User Manual page 214

Chapter 30 TLS PVC
Table 67 TLS PVC (continued)
LABEL
Show Port
Index
Port
VPI/VCI
VID
Priority
DS/US VC Profile
Select
Delete
Select All
Select None
214
DESCRIPTION
Select which DSL port(s) for which to display TLS PVC settings.
This field displays the number of the PVC. Click a PVC's index number to use
the top of the screen to edit the PVC.
Note: At the time of writing, you cannot edit the VPI and VCI. If
you want to change them, add a new PVC with the desired
settings. Then you can delete any unwanted PVCs.
This field displays the number of the DSL port on which the PVC is configured.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
This is the VLAN ID assigned to frames received on this channel.
This is the priority value (0 to 7) added to incoming frames without a (IEEE
802.1p) priority tag.
This shows which VC profile this channel uses for downstream traffic shaping.
The VC profile for upstream policing also displays if the channel is configured to
use one.
Select the check box in the Select column for an entry, and click Delete to
remove the entry.
Click this to select all entries in the table.
Click this to un-select all entries in the table.
IES-612-51A User's Guide