C
H A P T E R
This chapter describes the front panel and rear panel of the IES-612-51A and shows you how
to make the hardware connections.
3.1 Front Panel
The figure below shows the front panel of the IES-612-51A.
Figure 6 Front Panel: AC Input
3.1.1 Front Panel Ports
The following table describes the port labels on the front panel.
Table 1 Front Panel Ports
LABEL
CONSOLE
LAN 10/100
USER/CO
3.2 LEDs
The following table describes the LEDs on the front panel.
Table 2 LEDs
LED
ALM
IES-612-51A User's Guide
DESCRIPTION
Only connect to this port if you want to configure the IES-612-51A using the command
line interface (CLI) via the console port.
Connect these ports to a computer, a hub, an Ethernet switch or router.
Connect the Telco-50 connector USER pins (14-25, 39-50) to subscribers respectively.
Connect the Telco-50 connector CO pins (1-12, 26-37) to the telephone company for
subscribers respectively.
COLOR
STATUS
Red
On
Off
Front Panel
DESCRIPTION
The IES-612-51A is functioning abnormally.
The IES-612-51A is functioning normally.
3
49