Pae Pvc Session Command; Pae Pvc Counter Command; Figure 284 Pae Pvc Show Command Example; Figure 285 Pae Pvc Session Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 53 Virtual Channel Management Commands

Figure 284 PAE PVC Show Command Example

ras> adsl paepvc show 1
port vpi
---- --- ----- ---- --- ----- -----------------------------------
1 1

53.8.4 PAE PVC Session Command

Syntax:
ras> adsl paepvc session <portlist> [<vpi> <vci>]
where
<portlist>
<vpi>
<vci>
This command displays the status of PPPoA-to-PPPoE PVC sessions on the specified port(s)
or PVCs.
The following example displays the settings for port 1.

Figure 285 PAE PVC Session Command Example

ras> adsl paepvc session 1
pvc 1-1/33
session state : down
session id
session uptime: 0 secs
acname
srvcname

53.8.5 PAE PVC Counter Command

Syntax:
ras> adsl paepvc counter <portlist> [<vpi> <vci>]
where
<portlist>
394
vci pvid pri htime US/DS vcprofile/acname/srvcname
33 1 0 10 dsprofile: DEFVAL
usprofile:
acname
srvcname : video
The port number of the PAE PVC. You can specify a single
=
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
The VPI of the PAE PVC.
=
The VCI of the PAE PVC.
=
: 0
:
:
The port number of the PAE PVC. You can specify a single
=
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
: vom
IES-612-51A User's Guide