Dhcp Snoop Status Screen; Figure 94 Dhcp Snoop Status; Table 57 Dhcp Snoop Status - ZyXEL Communications IES-612-51A User Manual

Chapter 26 DHCP Snoop
Table 56 DHCP Snoop (continued)
LABEL
Select
Active
Inactive
All
None

26.3 DHCP Snoop Status Screen

Use this screen to look at or to clear the DHCP snooping table on each port. To open this
screen, click Advanced Application, DHCP Snoop, DHCP Snoop Status.

Figure 94 DHCP Snoop Status

The following table describes the labels in this screen.

Table 57 DHCP Snoop Status

LABEL
DHCP Snoop
DHCP Counter
Show Port
Port
Overflow
IP
MAC
Flush
192
DESCRIPTION
Select this, and click Active or Inactive to enable or disable the DHCP
snooping on this port.
Click this to enable DHCP snooping on the selected ports.
Click this to disable DHCP snooping on the selected ports.
Click this to select all entries in the table.
Click this to un-select all entries in the table.
DESCRIPTION
Click DHCP Snoop to open the screen where you can activate or deactivate
DHCP snooping on each port (see
Click DHCP Counter to open the screen where you can look at a summary of
the DHCP packets on each port (see
Select a port for which you wish to view information.
This field displays the selected DSL port number(s).
The DHCP server can assign up to 32 IP addresses at one time to each port.
This field displays the number of requests from DHCP clients above this limit.
This field displays the IP address assigned to a client on this port.
This field displays the MAC address of a client on this port to which the DHCP
server assigned an IP address.
Click Flush to remove all of the entries from the DHCP snooping table for the
selected port(s).
Section 26.2 on page 191).
Section 26.4 on page 193).
IES-612-51A User's Guide