ZyXEL Communications IES-612-51A User Manual page 272

Chapter 41 Commands Summary
Table 88 Commands (continued)
CLASS COMMAND
vlan frametype
vlan cpu show
vlan cpu set
mac flush
mac agingtime show
mac agingtime set
mac antispoofing
show
mac antispoofing
enable
mac antispoofing
disable
mac count show
mac count enable
mac count disable
mac count set
mac filter show
mac filter enable
mac filter disable
mac filter mode
mac filter set
mac filter delete
pktfilter show
pktfilter set
pktfilter
pppoeonly
dot1x show
dot1x enable
272
PARAMETERS DESCRIPTION
Sets the specified DSL port to
<portlist>
accept tagged, untagged or
<all|tag>
Ethernet frames (or both).
Note: enet1, enet2 are fixed at
'all'.
Displays the VLAN ID of the
Management VLAN.
Sets the VLAN ID of the
<vid>
Management VLAN.
Clears learned MAC addresses
from the forwarding table.
Displays the MAC aging out time
period.
Sets the MAC aging out time
<sec,
period.
10..10000|0:disabl
ed>
Show the MAC antispoofing
status
Turns on the MAC antispoofing
Turns off the MAC antispoofing
Displays the system's current
[portlist]
MAC address count settings.
Turns on the MAC address count
<portlist>
filter for an ADSL port(s).
Turns off the MAC address count
<portlist>
filter for an ADSL port(s).
Sets the MAC address count filter
<portlist> <count>
for an ADSL port(s).
Displays MAC filter settings.
[portlist]
Turns on the MAC filter.
[portlist]
Turns off the MAC filter.
[portlist]
Sets the MAC filter to accept or
<port>
deny.
<accept|deny>
Adds a MAC filter MAC entry on
<port> <mac>
an ADSL port(s).
[<mac> <mac> ...]
Removes a MAC filter MAC entry
<port> <mac>
on an ADSL port(s).
[<mac> <mac> ...]
Display packet filter settings.
[portlist]
Set packet filter for port
set <portlist>
<filter>
Set packet filter to pppoe only for
pppoeonly
port.
<portlist>
Display dot1x settings.
[portlist]
Turn on dot1x.
P
H/H
M/~
H/~
H/H
M/L
H/H
M/L
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
IES-612-51A User's Guide