Packet Filter Pppoe Only Command; Figure 192 Packet Filter Set Command Example; Figure 193 Packet Filter Pppoe Only Command Example - ZyXEL Communications IES-612-51A User Manual

The following example sets DSL port 5 to reject ARP, PPPoE and IGMP packets.

Figure 192 Packet Filter Set Command Example

ras> switch pktfilter set 5 arp pppoe igmp

48.1.3 Packet Filter PPPoE Only Command

Syntax:
ras> switch pktfilter pppoeonly <portlist>
This command sets the IES-612-51A to allow only PPPoE traffic on the specified DSL port(s).
The system will drop any non-PPPoE packets.
The following example sets DSL port 1 to accept only PPPoE packets.

Figure 193 Packet Filter PPPoE Only Command Example

ras> switch pktfilter pppoeonly 1
IES-612-51A User's Guide
Chapter 48 Packet Filter Commands
329