Mvlan Group Screen; Figure 79 Mvlan Group; Table 45 Mvlan Group - ZyXEL Communications IES-612-51A User Manual

Chapter 19 Multicast VLAN
Table 44 MVLAN Setup (continued)
LABEL
Control
Tagging
Add
Cancel

19.4 MVLAN Group Screen

Use this screen to configure ranges of multicast IP addresses for each multicast VLAN. To
open this screen, click Advanced Application, Multicast VLAN, MVLAN Group.

Figure 79 MVLAN Group

The following table describes the labels in this screen.

Table 45 MVLAN Group

LABEL
MVLAN Status
MVLAN Setup
168
DESCRIPTION
Select Fixed for the port to be a permanent member of this multicast VLAN. Use
the Select All button to include every port.
Select Forbidden if you want to prohibit the port from joining this multicast
VLAN. Use the Select All button to include every port.
Select TX Tagging if you want the port to tag all outgoing frames transmitted
with this VLAN ID. Use the All button to include every port. Use the None button
to clear all of the ports check boxes.
Click Add to save your changes to the IES-612-51A's volatile memory. The IES-
612-51A loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring the fields afresh.
DESCRIPTION
Click MVLAN Status to open the MVLAN Status screen where you can view a
summary of all multicast VLAN on the IES-612-51A (see
165).
Click MVLAN Setup to open the MVLAN Setup screen where you can
configure basic settings and port members for each multicast VLAN (see
Section 19.3 on page 166).
Section 19.2 on page
IES-612-51A User's Guide