Igmp Snoop Disable Command; Igmp Filter Commands; Igmp Filter Show Command; Igmp Filter Set Command - ZyXEL Communications IES-612-51A User Manual

Chapter 47 IGMP Commands

47.2.3 IGMP Snoop Disable Command

Syntax:
ras> switch igmpsnoop disable
This command turns off IGMP proxy or snooping.
The following example sets the device to not use IGMP proxy or snooping.

Figure 173 IGMP Snoop Disable Command Example

ras> switch igmpsnoop disable

47.3 IGMP Filter Commands

Use the IGMP filter commands to define IGMP filter profiles and assign them to DSL ports.
IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a
service available to a specific IGMP multicast group. You can configure an IGMP filter profile
for an IGMP multicast group that has access to a service (like a SIP server for example). Then
you can assign the IGMP filter profile to DSL ports that are allowed to use the service.

47.3.1 IGMP Filter Show Command

Syntax:
ras> switch igmpfilter show [portlist]
where
[portlist]
This command displays which IGMP filter profile a DSL port(s) is using.
The following example displays which IGMP filter profile DSL port 5 is using.

Figure 174 IGMP Filter Show Command Example

ras> switch igmpfilter show 5
port
--------------------------------------
9

47.3.2 IGMP Filter Set Command

Syntax:
ras> switch igmpfilter set [<port>|*] <name>
314
You can specify a single DSL port <1>, all DSL ports <*> or a
=
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
profile
DEFVAL
IES-612-51A User's Guide