Figure 137 Statistics Port Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 42 Command Examples
where
<portlist>
<vpi> <vci>
[clear]
This command displays and/or erases port statistics.
The following example displays port statistics for DSL port 1.

Figure 137 Statistics Port Command Example

ras> statistics port 1
[adsl port 1]
tx packets
rx packets
tx uni-packets
rx uni-packets
tx nonuni-packets : 19
rx nonuni-packets : 0
tx discard packets: 0
rx discard packets: 0
errors
tx rate
rx rate
tx bytes
rx bytes
where
tx uni-packets
rx uni-packets
tx nonuni-
packets
rx nonuni-
packets
See Chapter 6 on page 75
282
You can specify a single port <1>, all ports <*> or a list of
=
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
= The VPI and VCI of an individual PVC.
Use
=
port(s) or PVC's counters back to zero.
: 20
: 0
: 1
: 0
: 0
(bytes/s): 0
(bytes/s): 128
: 5904
: 0
= This field shows the number of unicast packets transmitted
on this port.
= This field shows the number of unicast packets received on
this port.
This field shows the number of non-unicast (broadcast and
=
multicast) packets transmitted on this port.
This field shows the number of non-unicast (broadcast and
=
multicast) packets received on this port.
for details on the other port statistics fields.
to have the IES-612-51A set the specified
clear
IES-612-51A User's Guide