Ppvc Delete Command; 2684 Routed Mode Commands; Figure 267 Ppvc Show Command Example; Figure 268 Ppvc Delete Command Example - ZyXEL Communications IES-612-51A User Manual

This command displays the runtime configured PPVCs.
The following example displays the PPVCs configured on DSL port 5.

Figure 267 PPVC Show Command Example

ras> adsl ppvc show 5
port vpi
================================
5 8

53.6.2 PPVC Delete Command

Syntax:
ras> adsl ppvc delete <portlist> <vpi> <vci>
where
<portlist>
<vpi>
<vci>
This command removes a PPVC. Removing a PPVC also deletes all of the member PVCs.
The following example removes a PPVC with VPI 8 and VCI 35 for port 5.

Figure 268 PPVC Delete Command Example

ras> adsl ppvc delete 5 8 35

53.7 2684 Routed Mode Commands

Use the 2684 routed mode to have the IES-612-51A add MAC address headers to 2684 routed
mode traffic from a PVC that connects to a subscriber device that uses 2684 routed mode. You
can also specify the gateway to which the IES-612-51A sends the traffic and the VLAN ID tag
to add. See RFC-2684 for details on routed mode traffic carried over AAL type 5 over ATM.
Use the commands in the following order to set up a 2684 routed mode PVC.
1 Use the
2 Use the
2684 routed mode traffic.
3 Use the
traffic. The domain is the range of IP addresses behind the subscriber's device (the CPE
or Customer Premises Equipment). This includes the CPE device's LAN IP addresses
and the IP addresses of the LAN computers.
IES-612-51A User's Guide
vci encap pvid pri
35 llc 25 6
= The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
The VPI of the PPVC.
=
The VCI of the PPVC.
=
commands to configure gateway settings.
adsl rpvc gateway
command to configure RPVCs (2684 routed mode PVCs) for
adsl rpvc set
adsl rpvc route set
Chapter 53 Virtual Channel Management Commands
command to configure domains for 2684 routed mode
383