Ip Setup; Chapter 11 Ip Setup; Figure 44 Ip Setup; Table 16 Ip Setup - ZyXEL Communications IES-612-51A User Manual

C
H A P T E R
The IP Setup screen allows you to configure a device IP address, subnet mask and DNS
(domain name server) for management purposes.
To open this screen, click Basic Setting, IP Setup.

Figure 44 IP Setup

The following table describes the labels in this screen.

Table 16 IP Setup

LABEL
IP
IP Mask
Apply IP setting
Cancel
Default Gateway
Apply Gateway
setting
Cancel
IES-612-51A User's Guide
DESCRIPTION
Enter the IP address of your IES-612-51A in dotted decimal notation for
example 1.2.3.4.
Enter the IP subnet mask of your IES-612-51A in dotted decimal notation for
example 255.255.255.0.
Click Apply IP setting to save your changes to the device's IP address and/or
subnet mask to the IES-612-51A's volatile memory. The IES-612-51A loses
these changes if it is turned off or loses power, so use the Config Save link on
the navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to begin configuring the fields again.
Enter the IP address of the default outgoing gateway in dotted decimal notation.
Click Apply Gateway setting to save your changes to the device's IP address
and/or subnet mask to the IES-612-51A's volatile memory. The IES-612-51A
loses these changes if it is turned off or loses power, so use the Config Save
link on the navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to begin configuring the fields again.
11

IP Setup

103