ZyXEL Communications IES-612-51A User Manual page 169

12-port adsl2/2+ standalone mini-dslam
Hide thumbs Also See for IES-612-51A:
Table of Contents

Advertisement

Table 45 MVLAN Group (continued)
LABEL
MVLAN ID
Index
Start Multicast IP
End Multicast IP
Apply
Cancel
MVLAN ID
Name
State
Entry Index
Start Multicast IP
End Multicast IP
Select
Delete
Cancel
IES-612-51A User's Guide
DESCRIPTION
Select the VLAN ID of the multicast VLAN for which you want to configure a
range of multicast IP addresses.
Select the index number of the multicast VLAN group (the range of multicast IP
addresses) you want to configure for this multicast VLAN. If you want to change
the current settings, select an index number that already exists. If you want to
add a new multicast VLAN group, select an index number that does not exist.
Enter the beginning of the range of multicast IP addresses. The IP address must
be a valid multicast IP address, between 224.0.0.0 and 239.255.255.255.
Enter the end of the range of multicast IP addresses. The IP address must be a
valid multicast IP address, between 224.0.0.0 and 239.255.255.255.
Click Apply to save your changes to the IES-612-51A's volatile memory. The
IES-612-51A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring the fields afresh.
Select the VLAN ID of the multicast VLAN for which you want to look at or
remove the multicast IP addresses currently added to it.
This field displays the name of this multicast VLAN.
This field shows whether this multicast VLAN is active (Enable) or inactive
(Disable).
This field displays the index number of each multicast VLAN group (the range of
multicast IP addresses) configured for this multicast VLAN.
This field displays the beginning of this range of multicast IP addresses.
This field displays the end of this range of multicast IP addresses.
Select this, and click Delete to remove the multicast VLAN group.
Click this to remove the selected multicast VLAN groups.
Click Cancel to begin configuring the fields afresh.
Chapter 19 Multicast VLAN
169

Advertisement

Table of Contents
loading

Table of Contents