Configure Vlan Port Settings; Figure 34 Advanced Application > Vlan > Vlan Port Setting - ZyXEL Communications ONU-2024 Series User Manual

Table 16 Advanced Application > VLAN > Static VLAN (continued)
LABEL
Tagging
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

8.3.3 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. See Section on page 79
Setting link in the VLAN Status screen.
Figure 34 Advanced Application > VLAN > VLAN Port Setting
ONU User's Guide
DESCRIPTION
Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Click Add to save your changes to the ONU's run-time memory. The ONU loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
for more information on static VLAN. Click the VLAN Port
Chapter 8 VLAN
85