Operating Modes Of Sitrlrpa - Siemens SITRANS PCS 7 Function Manual

SITRANS LR PA
14.1 SitrLRPA
Status word allocation for Status3 parameter
You can find a description for each parameter in section I/Os of SitrLRPA (Page 654).
0
8
9
10
11
12
13
14 - 15
16
17
18
19
20 - 21
22
23
24
25
26
27
28
29
30
31
14.1.2

Operating modes of SitrLRPA

The block can be operated using the following modes:
● On
● Out of service
"On"
You can find general information about the "On" mode in the On chapter.
"Out of service"
You can find general information about the "Out of service" mode in the Out of service section.
The descriptions of the operating modes are identical for the SitrLRPA and the APL; refer to the
Online Help for the standard APL blocks for information on them.
644
Status bit Parameter
Not used
PV2AH_Act.Value
PV2WH_Act.Value
PV2WL_Act.Value
PV2AL_Act.Value
PV2AH_En
PV2WH_En
Not used
PV2WL_En
PV2AL_En
PV2AH_MsgEn
PV2WH_MsgEn
Not used
PV2WL_MsgEn
PV2AL_MsgEn
QWronDev
1 = error when reading acyclic data (active only for the duration of one cycle)
1 = error when writing acyclic data (active only for the duration of one cycle)
Analog input 2 (PV2) configured
Show value for fill time
Show value for empty time
Fill time and empty time visible
1 = display "Write configuration data" in the faceplate
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11