Siemens SITRANS PCS 7 Function Manual page 475

The block has the following permissions for the OS3Perm parameter:
Bit
Simulating signals
Simulation is triggered during runtime in the faceplate's parameter view by clicking on the
"Simulation" button.
You can simulate the following values in the faceplate via an input:
● The process values (outputs PV_Out0..4 and - in accordance with the configuration
- MassFlow, VolFlow, Density, CVolFlow, PMedTemp, FractA/B, FractA/
BP, Tot1/2/3, DosQuant) in the standard view via the inputs (SimPV0..4)
● The totalizer value (Tot_Out) in the standard view via the input (SimTot).
● The sensor temperature (SenTemp) in the standard view via the input (SimSTemp).
● The electronics temperature (ElecTemp) in the standard view via the input (SimETemp).
Display and operating range for process values and limits
The scaling of the driver block (ScaleOut output of the PCS7AnIn block, default connection
in the CFC template of the SitrFC43 block) is used as the display and operating range
(PV_OpScale) for the process value PV_In.
Displaying auxiliary values
This block provides the standard "Display auxiliary values" function (UserAna1 or UserAna2
inputs); for more information, refer to the APL Online Help.
Opening additional faceplates
This block provides the standard "Call further faceplates" function that is described in the APL
Online Help.
Generating instance-specific messages
This block provides the standard "Generate instance-specific messages" function that is
described in the APL Online Help.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Function
0 1 = Operator can read configuration data and dosing state from device
1 1 = Operator can write configuration data to device
2 1 = Operator can enter password
3 1 = Operator can reset protection/interlock
4 - 6 1 = Operator can change SV, TV and QV in simulation mode
7 1 = Operator can activate bypass functionality
8 1 = Operator can deactivate bypass functionality
9 - 31 Not used
SITRANS FC430
12.1 SitrFC43
475