Block Icon For Sitrp_Pa - Siemens SITRANS PCS 7 Function Manual

(2)Read out min/max pointers
In this area, you can read out the values of all slave pointers from the module.
(3)Enabled operations
This area shows all operations for which special operator authorizations are assigned. They
depend on the configuration in the engineering system (ES) that applies to this block.
Symbols for enabled operations:
● Green check mark: The OS operator can control this parameter
● Gray check mark: the OS operator cannot control this parameter at this time due to the
process
● Red cross: The OS operator cannot control this parameter due to the configured AS
operator permissions (OS_Perm or OS1Perm)
11.1.8.7

Block icon for SitrP_PA

A variety of block icons is available with the following functions:
● Process tag type
● Limits (high/low)
● Violation of alarm and warning limits as well as the control system fault CSF
● Operating modes
● Signal status, release for maintenance
● Memo display
● Process value (PV)
The block icons from template @TemplateAPL_SITRANS.PDL:
Icons
For more information on the block icon and operating options in the block icon, refer to the
following sections in the APL online help:
● "Configuring the block icons"
● "Block icon structure"
● "Operation via the block icon"
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Selection of the block icon in CFC
1
-
SITRANS P PA
11.1 SitrP_PA
Special features
Block icon in the "Out of service"
operating mode
457