Siemens SITRANS PCS 7 Function Manual page 389

In/out parameters
Parameter
RdReq
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Description
Is interconnected with the SxRdReq output of the SitraPDr block. Only exactly one member variable
is set to TRUE:
STRUCT
DevVarAssin : Assignment of measured variables to HART variables
DevVarUnits : Units of measured variables
ManufacturerID : Manufacturer ID
mASetPoints : Limits of the 4 to 20 mA signal
UserUnitStr : User-defined unit
MinMaxPRst : Resettable slave pointer for pressure
MinMaxSPRst : Resettable slave pointer for static pressure
MinMaxSTRst : Resettable slave pointer for sensor temperature
MinMaxETRst : Resettable slave pointer for electronics temperature
MaxPRst : Resettable slave pointer for maximum pressure
MinPRst : Resettable slave pointer for minimum pressure
MaxSTRst : Maximum value of resettable slave pointer for sensor temperature
MinSTRst : Minimum vlaue of resettable slave pointer for sensor temperature
MaxETRst : Maximum value of resettable slave pointer for electronics temperature
MinETRst : Minimum value of resettable slave pointer for electronics temperature
AlarmLimitsP500 : Alarm limits of P500
LxUpperLim : Limiter x: High limit
LxLowerLim : Limiter x: Low limit
LxMonVar : Limiter x: Monitoring variable
LxMonAction : Limiter x: Monitoring action (high, low, high+low)
LxHyst : Limiter x: Hysteresis
LxRespT : Limiter x: Response time
LxAlmActivation: Limiter x: Alarm activation
LxMonTrigger : Limiter x: Monitoring trigger
ScaleLevelVol : Scaling of level and volume
ScaleFlow : Scaling of flow
AccessLevel : Access rights P420
SilTargetMode : Sil Target Mode P420
END_STRUCT
SITRANS P
10.1 SitransP
389