Siemens SITRANS PCS 7 Function Manual page 614

SITRANS FC430 PA
13.1 SiFC43PA
Second Parameter View
(1) Change to first parameter view
The first part of the parameter view of the faceplate can be selected here.
(2), (5) and (8) Totalizer preset value
In this area, you specify a preset value for the totalizer of PV2, PV3, PV4 respectively. If a
totalizer is not configured, the area is switched to invisible.
(3), (6) and (9) Set totalizer preset value
In this area, you can set the totalizers to the preset value of PV2, PV3, PV4 respectively with the
click of a button. If a totalizer is not configured, the area is switched to invisible.
(4) Display and change the totalizer direction PV2 (Positive and negative, positive and negative)
This area shows you the default direction state for the totalizer PV2. The following states can
be shown and executed here:
● "Positive and negative (Balanced)"
● "Positive"
● "Negative"
614
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11