Siemens SITRANS PCS 7 Function Manual page 661

Parameter Description
Output for process value PV1
PV1Out
Output for process value PV2
PV2Out
Output for process value PV1 in [%]
TankFilled
Fill time calculated with current gradient value [s]
TimeFillS
Empty time calculated with current gradient value
TimeEmptyS
[s]
Fill time calculated with current gradient value [s]
TimeFill
Empty time calculated with current gradient value
TimeEmpty
[TEmptyUnit]
Unit of TimeFill
TFillUnit
Unit of TimeEmpty
TEmptyUnit
Echo algorithm
Algorithm
Echo confidence
Confidenc
Echo strength
EchoStren
Gradient value for process value PV1
PV1Grad
Gradient value for PV1, max. peak value
PV1GradPP
Gradient value for PV1, min. peak value
PV1GradNP
Limit sensor PV1:
PV1AH_Act
1 = Alarm (high) active.
You can change the response for this parameter by
setting Feature bit 28 (deactivate switching points)
and Feature bit 29 (high/low signal limit violation)
accordingly.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Type Default
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
INT 0
INT 0
BYTE 16#00
BYTE 16#00
BYTE 16#00
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : BOOL ● 0
● ST: BYTE ● 16#80
SITRANS LR PA
14.1 SitrLRPA
661