Functions Of Sifc43Pa - Siemens SITRANS PCS 7 Function Manual

SITRANS FC430 PA
13.1 SiFC43PA
"Automatic mode"
"Automatic mode" supports the transfer of the following direction to the totalizer:
● "Positive and Negative (Balanced)" (positive edge BalPV2/PV3/PV4Aut)
● "Positive" (positive edge PosPV2/PV3/PV4Aut)
● "Negative" (positive edge NegPV2/PV3/PV4Aut)
"Automatic mode" supports the transfer of the following command to the totalizer:
● "Hold" (positive edge HoldPV2/PV3/PV4Aut)
● "Totalize" (positive edge TotalizePV2/PV3/PV4Aut)
"Automatic mode" supports the transfer of the following commands to the dosing unit:
● "Start" (positive edge DSrtAut)
● "Continue" (DContAut = 1)
● "Pause" (DPauseAut = 1)
● "Stop" (DStpAut = 1)
"Manual mode"
"Manual mode" supports the transfer of the following direction to the totalizer:
● "Positive and Negative (Balanced)" (positive edge BalPV2/PV3/PV4Man)
● "Positive" (positive edge PosPV2/PV3/PV4Man)
● "Negative" (positive edge NegPV2/PV3/PV4Man)
"Manual mode" supports the transfer of the following command to the totalizer:
● "Hold" (positive edge HoldPV2/PV3/PV4Man)
● "Totalize" (positive edge TotalizePV2/PV3/PV4Man)
"Manual mode" enables the transfer of the following commands to the dosing unit:
● "Start" (positive edge DSrtMan)
● "Continue" (DContMan = 1)
● "Pause" (DPauseMan = 1)
● "Stop" (DStpMan = 1)
"Out of service"
For general information about the "out of service" mode, refer to the APL Online Help.
13.1.3

Functions of SiFC43PA

The functions for this block are listed below.
552
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11