Template Of Sitrlrpa; Operator Control & Monitoring; Views Of Sitrlrpa - Siemens SITRANS PCS 7 Function Manual

14.1.8

Template of SitrLRPA

This process tag type is used to connect a Sitrans LR 250 PA with driver blocks to PCS 7 with
one ("Sitrans LR250 PA" template) or two process values ("Sitrans LR250 PA 2AI" template).
Note
Since the APL driver blocks Or08, SelST16, FbAnIn are missing in the library for licensing
reasons, it must be copied into the block library before the Sitrans LR250 PA-Templates is
copied. For this purpose, create a new CFC in the library, open it and place the Or08, SelST16,
FbAnIn blocks from the PCS 7 AP Library in the CFC using drag-and-drop in order for the block
to be copied into the library. The newly created CFC can be deleted once this is completed.
The cyclic values are transferred by the PCS 7 standard block FbAnIn (process values PV1
and PV2), the acyclic values are transferred by the PiDr64 block from and to the device.
The process tag type contains the required interconnections between the blocks mentioned
above. If a 2nd analog input is not configured in the HW Config, please use the "Sitrans LR250
PA" template, otherwise the "Sitrans LR250 PA 2AI" template.
The PV inputs of the FbAnIn blocks (process values PV1 and PV2) must be interconnected
with the corresponding input double word from HW Config for instantiation of the template. The
Laddr input of the PiDr64 block (AcyclicData) is configured with the address of the process
value PV1 (not interconnected!).
All required information can be found in HW Config.
14.1.9 Operator control & monitoring
14.1.9.1

Views of SitrLRPA

Views of the SitrLRPA block
The SitrLRPA block has the following views:
● Standard view of SitrLRPA (Page 666)
● Alarm view (Page 34)
● Limit view of SitrLRPA (Page 670)
● Trend view (Page 36)
● Parameter view of SitrLRPA (Page 672)
● Preview of SitrLRPA (Page 674)
● Memo view (Page 35)
● Batch view (Page 33)
For general information on the faceplate and block icon, refer to the sections "Faceplate
structure" and "Block icon structure" in the APL Online Help.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS LR PA
14.1 SitrLRPA
665