Siemens SITRANS PCS 7 Function Manual page 488

SITRANS FC430
12.1 SitrFC43
Parameter
DRstLi
PV_Meas0..1
PV_Meas2..4
RdCfgOp
WrCfgOp
ZeroAdjOp
InMflZFSupp
InVflZFSupp
GradHUpEn
GradHDnEn
GradLEn
GradHUpMsgEn
GradHDnMsgEn
GradLMsgEn
488
Description
Dosing unit: 1 = Reset interlock
via interconnection
Measured value that is intercon‐
nected at the PV_In input:
0: Mass flow
1: Volume flow
2: Density
14: Not used
Measured value that is intercon‐
nected at the PV/SV/TV/QV input:
0: Mass flow
1: Volume flow
2: Density
3: Process media temperature
4: Corrected Volume flow
5: Fraction A
6: Fraction B
7: Fraction A %
8: Fraction B %
11: Totalizer 1
12: Totalizer 2
13: Totalizer 3
14: Not used
15: Dosing (only PV_Meas2)
1 = Read all configuration data
from FC430
1 = Write all configuration data to
FC430
1 = Start automatic zero balanc‐
ing
Low flow cut-off suppression
(mass flow)
(only for readback)
Low flow cut-off suppression (vol‐
ume flow)
(only for readback)
1 = Enable gradient monitoring
(high) for positive changes
1 = Enable gradient monitoring
(high) for negative changes
1 = Enable gradient monitoring
(low)
1 = Enable gradient (high) mes‐
sage for positive changes
1 = Enable gradient (high) mes‐
sage for negative changes
1 = Enable gradient (low) mes‐
sage for negative changes
Type Default
STRUCT -
● Value : BOOL ● 1
● ST: BYTE ● 16#FF
BYTE 14
BYTE 14
BOOL 0
BOOL 0
BOOL 0
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
BOOL 1
BOOL 1
BOOL 0
BOOL 1
BOOL 1
BOOL 1
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11