Error Handling Of Sitranst - Siemens SITRANS PCS 7 Function Manual

● The minimum of Input 1 and Input 2 with both as back up
(SimMinI1I2BckLi, MinI1I2Bck)
● The maximum of Input 1 and Input 2 with both as back up
(SimMaxI1I2BckLi, MaxI1I2Bck)
● The electronics temperature (SimETLi, ElecTemp)
The outputs Input1, Input2, Input1CJC, Input2CJC, AvgI1I2, DiffI1I2,
DiffI2I1, AbDiffI1I2, MinI1I2 , MaxI1I2, MaxI1I2, I1I2Bck, I1I2Bck,
AvgI1I2Bck, MinI1I2Bck, MaxI1I2Bck and ElecTemp are also simulated in accordance
with the module configuration when simulation is carried out via the faceplate.
Display and operator input area for process values and setpoints
The scaling of the 4 to 20 mA signal from the driver block (ScaleOut output of the Pcs7AnIn
block, default connection in the CFC template of the SitransT) is used as the display and
operating range (PV_OpScale) for the 4 to 20 mA signal.
Displaying auxiliary values
This block provides the standard "Display auxiliary values" function (UserAna1
or UserAna2inputs); for more information, refer to the APL online help.
Opening additional faceplates
This block provides the standard "Call further faceplates" function that is described in the APL
Online Help.
Generating instance-specific messages
This block provides the standard "Generate instance-specific messages" function that is
described in the APL Online Help.
Time stamp
This block receives a time stamp value via the EventTSIn input parameter. Refer to the
"Functions of EventTs" in the APL Online Help.
SIMATIC BATCH functionality
This block provides the standard "SIMATIC BATCH functionality" function that is described in
the APL Online Help.
9.1.4

Error handling of SitransT

For general information on error handling of all blocks, refer to the "Error handling" chapter in
the APL Online Help.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS T
9.1 SitransT
329