Siemens SITRANS PCS 7 Function Manual page 162

SITRANS LUT400
6.1 Lut400
Parameter
QV
InL_AHOnLim*
InL_AHOffLim*
InL_ALOffLim*
InL_ALOnLim*
InL_AHIBLim*
InL_ALIBLim*
InL_AHOBLim*
InL_ALOBLim*
InT_AHOnLim*
InT_AHOffLim*
InT_ALOffLim*
InT_ALOnLim*
InFr_AHOnLim*
InFr_AHOffLim*
InFr_ALOffLim*
InFr_ALOnLim*
LagTime
PV_OpScale
PV_Unit0*
PV_Unit1*
PV_Unit2*
PV_Unit3*
PV_Unit4*
L_AH_DC*
L_AH_DG*
162
Description
Fourth HART variable (quaternary varia‐
ble)
Fill level alarm limit ON (high)
Fill level alarm limit OFF (high)
Fill level alarm limit OFF (low)
Fill level alarm limit ON (low)
Fill level alarm limit "Within band" (high)
Fill level alarm limit "Within band" (low)
Fill level alarm limit "Outside band" (high) REAL
Fill level alarm limit "Outside band" (low) REAL
Temperature alarm limit ON (high)
(The alarm is only in the module, not in
WinCC)
Temperature alarm limit OFF (high)
(The alarm is only in the module, not in
WinCC)
Temperature alarm limit OFF (low)
(The alarm is only in the module, not in
WinCC)
Temperature alarm limit ON (low)
(The alarm is only in the module, not in
WinCC)
Flow alarm limit ON (high)
Flow alarm limit OFF (high)
Flow alarm limit OFF (low)
Flow alarm limit ON (low)
Delay time [s]
Limit for scale in PV bar graph of face‐
plate
Unit for process value (4 to 20 mA signal) INT
Unit for the first HART variable (primary
variable)
Unit for the second HART variable (sec‐
ondary variable)
Unit for the third HART variable (tertiary
variable)
Unit for the fourth HART variable (qua‐
ternary variable)
Delay time for incoming level alarm with
overrange process value [s]
Delay time for outgoing level alarm with
overrange process value [s]
Type Default
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
0.0
0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 10.0
STRUCT -
● High : REAL ● 100.0
● Low: REAL ● 0.0
0
INT 0
INT 0
INT 0
INT 0
REAL 0.0
REAL 0.0
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11