Siemens SITRANS PCS 7 Function Manual page 391

Parameter
Para
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Description
Is interconnected with the Para output of the SitraPDr block. Values of parameters which are written
to the device or read from it:
STRUCT
InProcess : Read/write data active
_OK : Data successfully read/written
Error : Error when reading/writing data
RdDrErr : Error reading a data record
WrDrErr : Error writing a data record
DevType : Device type
SlotHart : Slot number of the HART device (not to the device)
PV_Unit0 : Unit for process value (4 to 20 mA signal)
PV_Unit1 : Unit for the first HART variable PV
PV_Unit2 : Unit for the second HART variable SV
PV_Unit3 : Unit for the third HART variable TV
PV_Unit4 : Unit for the fourth HART variable QV
UsrUnitS : Unit of static pressure
InPassword : Password P420
PresUnit : Unit of pressure
STempUnit : Unit of sensor temperature
ETempUnit : Unit of electronics temperature
PUntUnit : Unit of untrimmed pressure
LevelUnit : Unit of level
VolUnit : Unit of volume
MassUnit : Unit of mass
VFlowUnit : Unit of volume flow
MFlowUnit : Unit of mass flow
UserUnit : Unit of user value
UsrUnitS : Unit of static pressure
PV_Meas0 : Measured variable of process variable PV (4 to 20 mA)
PV_Meas1 : Measured variable of process variable PV
PV_Meas2 : Measured variable of process variable SV
PV_Meas3 : Measured variable of process variable TV
PV_Meas4 : Measured variable of process variable QV
ScaleIn : STRUCT //Measuring range of process value PV
● High : High Value
● Low : Low Value
END_STRUCT;
MaxPRst : Maximum resettable pressure
MinPRst : Minimum resettable pressure
MaxSPRst : Maximum resettable static pressure
MinSPRst : Minimum resettable static pressure
MaxSTRst : Maximum resettable sensor temperature
MinSTRst : Minimum resettable sensor temperature
MaxETRst : Maximum resettable electronics temperature
SITRANS P
10.1 SitransP
391