Siemens SITRANS PCS 7 Function Manual page 580

SITRANS FC430 PA
13.1 SiFC43PA
Parameter
OS3Perm
OpSt_In
Feature
EventTsIn
Old‐
CmdTotPV2
(analog
PV3,PV4)
FractnUType
FractnAtxt
FractnBtxt
Tot1Ch
(analog Total‐
izer 2 and 3)
Ch2HwCnfg
LimPV1_OpS
cale
(analog
PV2,PV3,PV4
)
580
Description
I/O for operating permissions
Input parameter for local operator authoriza‐
tion, to be interconnected with the Out output
parameter of the upstream OpStations block
I/O for additional functions
For routing the signal status from an EventTs
message block.
Input parameter EventTsIn is used to inter‐
connect output parameter EventTsOut of
the EventTs block. When this interconnection
is configured, the messages of the EventTs
block are displayed (and can also be acknowl‐
edged) on the OS in the message view of the
technological block.
Last command of the totalizer PV2
(only for readback)
Measuring mode for fractions:
0: Mass
1: Volume
Name for fraction A (configured in PDM)
Name for fraction A (configured in PDM)
Process value totalizer 1:
0=Mass flow
1=Volume flow
2=Corrected volume flow
80=Fraction A
81=Fraction B)
Hardware configuration channel 2 (for internal
use only)
High and low limits for warning and alarm limits
PV1
Type Default
STRUCT -
● Bit 0 : BOOL ● 1
... ...
● Bit31: BOOL ● 1
DWORD 16#00000000
STRUCT -
● Bit 0 : BOOL ●
● Bit 1 : BOOL ●
● Bit 2 : BOOL ● 1
...
● Bit 6 : BOOL ● 1
● Bit 7 : BOOL ● 0
...
● Bit31: BOOL ● 0
STRUCT -
● Value : BYTE ● 0
● ST: BYTE ● 16#FF
BYTE 16#03
BYTE 16#00
S7-String
S7-String
BYTE 16#00
BYTE 16#00
STRUCT -
● High : REAL ● 1023000.0
● Low: REAL
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
0
0
0.0