Siemens SITRANS PCS 7 Function Manual page 386

SITRANS P
10.1 SitransP
Parameter
EventTsIn
PV_Meas0*
PV_Meas1*
PV_Meas2*
386
Description
For routing the signal status from an EventTs
message block.
The input parameter EventTsIn is used to in‐
terconnect the output parameter EventTsOut of
the EventTs block. When this interconnection is
configured, the messages of the EventTs block
are displayed on the OS in the message view of
the technological block and can also be acknowl‐
edged there.
Measured value that is interconnected at
the PV_In input:
0: Pressure
1: Sensor temperature
2: Electronics temperature
3: Pressure (untrimmed)
4: Fill level
5: Volume
6: Mass
7: Volume flow
8: Mass flow
9: User value
10: Static pressure
11: Not used
Measured value that is interconnected at the PV
input:
0: Pressure
1: Sensor temperature
2: Electronics temperature
3: Pressure (untrimmed)
4: Fill level
5: Volume
6: Mass
7: Volume flow
8: Mass flow
9: User value
10: Static pressure
11: Not used
Measured value that is interconnected at the SV
input:
0: Pressure
1: Sensor temperature
2: Electronics temperature
3: Pressure (untrimmed)
4: Fill level
5: Volume
6: Mass
7: Volume flow
8: Mass flow
9: User value
10: Static pressure
11: Not used
Type
STRUCT
● Value : BYTE
● ST: BYTE
BYTE
BYTE
BYTE
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Default
● 0
● 16#FF
11
11
11