Siemens SITRANS PCS 7 Function Manual page 531

(3) Compensation
Display of compensation value for dosing.
(4) Dosing unit cycle counter
Display of number of dosing cycles carried out since last reset
(5) Reset dosing unit cycle counter
Reset dosing counter
(6) Display and switchover of dosing operating mode
This area provides information on the currently valid dosing operating mode.
The block can be operated using the following modes:
● Local mode
● Automatic mode
● Manual mode
● Out of service
For more information on changing the operating mode, refer to the "Switching operating states
and operating modes" section in the APL Online Help.
(7) Display and change of setpoint if dosing is configured
The following states can be shown and changed here:
● "Internal"
● "External"
For more information, refer to the "Manual and automatic mode for motors, valves and dosing
units" section in the APL Online Help.
(8) Display and change the dosing unit: Start, resume, pause and stop
This area shows you the default operating state for the dosing unit. The following states can be
shown and changed here:
● "Start"
● "Continue"
● "Pause"
● "Stop"
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS FC430
12.1 SitrFC43
531