Siemens SITRANS PCS 7 Function Manual page 496

SITRANS FC430
12.1 SitrFC43
Parameter
WrReq
496
Description
If the structure is set for one of the member variables of type BOOL, the
block passes on the job for writing the data stored for that purpose or for
sending the corresponding command to the driver block. Only exactly
one member variable is set to TRUE:
STRUCT
Password : Password
PV_AH_Lim : PV - high alarm limit
PV_WH_Lim : PV - high warning limit
PV_WL_Lim : PV - low warning limit
PV_AL_Lim : PV - low alarm limit
PV_Hyst : PV - hysteresis
SV_AH_Lim : SV - high alarm limit
SV_WH_Lim : SV - high warning limit
SV_WL_Lim : SV - low warning limit
SV_AL_Lim : SV - low alarm limit
SV_Hyst : SV - hysteresis
TV_AH_Lim : TV - high alarm limit
TV_WH_Lim : TV - high warning limit
TV_WL_Lim : TV - low warning limit
TV_AL_Lim : TV - low alarm limit
TV_Hyst : TV - hysteresis
QV_AH_Lim : QV - high alarm limit
QV_WH_Lim : QV - high warning limit
QV_WL_Lim : QV - low warning limit
QV_AL_Lim : QV - low alarm limit
QV_Hyst : QV - hysteresis
ForceZerAdj : Force zero balancing
ZeroAdjCmd : Zero balancing command
DosingActRec : Active dosing recipe
DosingComp : Dosing compensation
DSetpoint : Dosing setpoint
DosingCmd : Dosing command
DRstCycCnt : Reset dosing counter
TotSVCmd : SV: Current totalizer command
TotTVCmd : TV: Current totalizer command
TotQVCmd : QV: Current totalizer command
TotSVReset : Reset totalizer SV
TotTVReset : Reset totalizer TV
TotQVReset : Reset totalizer QV
PresetValSV : Preset value, totalizer SV
PresetValTV : Preset value, totalizer TV
PresetValQV : Preset value, totalizer QV
ModeTotSV : Preset totalizer SV
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11