Siemens SITRANS PCS 7 Function Manual page 591

Output parameters
Parameter
QWronDev
MS_Release
BypassAct
PV1_Out1..4
PV2PreVal
(analog
PV3,PV4)
PV_Grad
PV_GradPP
PV_GradNP
GradHUpAct
GradHDnAct
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Description
1 = Wrong device connected
Release for maintenance:
1 = Release for OS operator
1 = Bypass is activated in this block
Process value
output PV1/PV2/PV3/PV4
Preset value, totalizer PV2
Gradient value for process value PV1
Gradient value for PV1 maximum peak
value
Gradient value for PV1 minimum peak
value
1 = Gradient alarm (high) for positive
changes.
1 = Alarm (low) active.
You can change the response for this
parameter by setting Feature bit 28 (de‐
activate switching points) and Feature
bit 29 (high/low signal limit violation) ac‐
cordingly.
1 = Gradient alarm (high) for negative
changes.
1 = Alarm (low) active.
You can change the response for this
parameter by setting Feature bit 28 (de‐
activate switching points) and Feature
bit 29 (high/low signal limit violation) ac‐
cordingly.
SITRANS FC430 PA
13.1 SiFC43PA
Type Default
BOOL 1
STRUCT -
● Value : BOOL ● 0
● ST: BYTE ● 16#80
STRUCT -
● Value : BOOL ● 0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : REAL ● 0.0
● ST: BYTE ● 16#80
STRUCT -
● Value : BOOL ● 0
● ST: BYTE ● 16#80
STRUCT -
● Value : BOOL ● 0
● ST: BYTE ● 16#80
591