8.1.8.2
Standard view of SipPS2PA
Standard view with auxiliary valve
(1) Display and switch the operating mode
This area provides information on the currently valid operating mode. The following operating
modes can be shown here:
● Manual mode (see the APL Online Help)
● Automatic mode (see the APL Online Help)
● Local mode (see the APL Online Help)
● Out of service (see APL Online Help)
For more information on switching over of the operating mode, refer to the "Switchover of
operating state and operating mode" section in the APL Online Help.
(2) Opening, closing and stopping the control valve
This area shows you the default operating state for the valve. The following states can be
shown and executed here:
● "Open"
● "Close"
● "Stop" (display only, no operation possible)
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SIPART PS2 PA
8.1 SipPS2PA
305