Siemens SITRANS PCS 7 Function Manual page 224

SIPART PS2 HART
7.1 SipPS2HA
Parameter
Protect
Rbk
CtrlDevtn
CurrentTemp
FW
CurrentTemp_Unit
RbkHyst
Rbk_WH_DC*
Rbk_WH_DG*
Rbk_W_DC*
Rbk_W_DG*
RbkWH_En
RbkWH_Lim
224
Description
0 = Protective interlocking is ef‐
fective; once the interlocking con‐
dition has disappeared, you will
have to reset the block
1 = Protective interlocking not ac‐
tivated
Position feedback for display on
OS
Control Deviation
Current Temeprature
FW version of device
Unit of current temperature
Alarm hysteresis for position feed‐
back
Delay time for incoming warning
message of the position feedback
with overrange/underrange proc‐
ess value or only with underrange
process value [s]
Delay time for outgoing warning
message of the position feedback
with overrange/underrange proc‐
ess value or only with underrange
process value [s]
Delay time for incoming warning
of the position feedback with over‐
range/underrange process value
or only with underrange process
value [s]
Delay time for outgoing warning
of the position feedback with over‐
range/underrange process value
or only with underrange process
value [s]
1 = Enable warning (high) for po‐
sition feedback
Limit for position feedback of
warning (high)
Type Default
STRUCT -
Value: BOOL 1
ST: BYTE 16#FF
STRUCT -
Value: REAL 0.0
ST: BYTE 16#80
STRUCT -
Value: REAL 0.0
ST: BYTE 16#80
STRUCT -
Value: REAL 0.0
ST: BYTE 16#80
ST: BYTE -
Value: REAL 0.0
ST: BYTE 16#80
REAL -
0.0
16#80
REAL 1.0
REAL 0.0
REAL 0.0
REAL 0.0
REAL 0.0
BOOL 0
REAL 90.0
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11