Operator Control & Monitoring; Sitrfc43 Views; Standard View Of Sitrfc43 - Siemens SITRANS PCS 7 Function Manual

12.1.9 Operator control & monitoring
12.1.9.1

SitrFC43 views

Views of the SitrFC43 block
The SitrFC43 block has the following views:
● Standard view of SitrFC43 (Page 509)
● Alarm view (Page 34)
● Limit view of SitrFC43 (Page 516)
● Trend view (Page 36)
● Parameter view of SitrFC43 (Page 521)
● Preview of SiFC43 (Page 523)
● Memo view (Page 35)
● Batch view (Page 33)
● Dosing view of SitrFC43 (Page 530)
For general information on the faceplate and block icon, refer to the sections "Faceplate
structure" and "Block icon structure" in the APL Online Help.
12.1.9.2

Standard view of SitrFC43

The current process values for mass flow, volume flow, density, process media temperature,
corrected volume flow, fraction A or B, fraction A or B in percent, or counter 1, 2 or 3 are
displayed in the standard view depending on the configuration of the process value and the Hart
auxiliary variables. If a measured value is not assigned to a variable, the field is hidden. The
gradient values always refer to the process value PV_In. The standard view is divided into two
parts.
Note
The following screenshots show a sample configuration for SV (dosing), TV (measured value)
and QV (totalizer). The structure of the faceplate is always based on the individual configuration
in PDM.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS FC430
12.1 SitrFC43
509