Operator Control & Monitoring; Sifc43Pa Views - Siemens SITRANS PCS 7 Function Manual

The cyclic values are transferred by the FbFC43PA, the acyclic values are transferred by the
FC43PADr and PiDr64 blocks to and from the device.
The Laddr input of the PiDr64 block (AcyclicData) is configured with the address of the
process value PV1 (not interconnected!).
The Feature bit 14 is used to configure whether the dosing function is used.
PV_Meas1..4 has to be configured according to hardware configuration and reading should be
performed from faceplate.
To instantiate the template, you must parameterize the inputs AMassFlow of the FbFC43PA
block (CyclicData) and Laddr of the PiDr64 block (AcyclicData) with the mass flow address from
the configuration of the FC430 PA in the HW Config.
13.1.9 Operator Control & Monitoring
13.1.9.1

SiFC43PA views

Views of the SiFC43PA block
The SiFC43PA block has the following views:
● Standard view of SiFC43PA (Page 600)
● Alarm view (Page 34)
● Limit view of SiFC43PA (Page 607)
● Trend view (Page 36)
● Parameter view of SiFC43PA (Page 612)
● Preview of SiFC43PA (Page 616)
● Memo view (Page 35)
● Batch view (Page 33)
● Dosing view of SiFC43PA (Page 623)
For general information on the faceplate and block icon, refer to the sections "Faceplate
structure" and "Block icon structure" in the APL Online Help.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS FC430 PA
13.1 SiFC43PA
599