Standard View Of Sitrp_Pa - Siemens SITRANS PCS 7 Function Manual

SITRANS P PA
11.1 SitrP_PA
11.1.8.2

Standard view of SitrP_PA

Depending on the configuration of the process value and the totalizer, the current process value
for pressure, volume flow, mass flow, level, volume, pressure (untrimmed), sensor and
electronics temperature, and the totalizer value are displayed. If a measured value is not
assigned to a variable, the field is hidden. The gradient values always refer to the process
value PV.
(1) Display and switch the operating mode
This area provides information on the currently valid operating mode. The operating mode
switchover depends on whether or not a totalizer is configured.
Without totalizer:
The following operating modes can be shown here:
● On (see APL Online Help)
● Out of service (see APL Online Help)
With totalizer:
446
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11