Standard View Of Sitrlrpa - Siemens SITRANS PCS 7 Function Manual

SITRANS LR PA
14.1 SitrLRPA
14.1.9.2

Standard view of SitrLRPA

Depending on the configuration of the first and second process values, the current process
values for volume, level and distance are displayed. If a measured value is not assigned to a
variable, the field is hidden. The gradient values always refer to the first process value PV1.
(1) Display and switchover of operating mode
This area provides information on the currently valid operating mode. The following operating
modes can be shown here:
● On (see the APL online help)
● Out of service (see the APL Online Help)
For more information on changing the operating mode, refer to the "Switching operating states
and operating modes" section in the APL Online Help.
(2) High and low scale range of the first process value (PV1)
These values provide information on the display range for the bar graph of the first process
value PV1. The scale range is set in the engineering system with the PV1OpScale parameter,
see Display and operating range for process values and limits.
666
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11