Functions Of The Faceplates; Batch View - Siemens SITRANS PCS 7 Function Manual

Functions of the faceplates

2.1

Batch view

Batch view
This area shows a display of the batch that is currently running (Batchview).
You can use the internal tag "@APLBatchEnable" to enable/disable the "Batch" button in the
toolbar.
Value of @APLBatchEnable
(1) "Enabled"
This area shows you if the block is enabled for operation via SIMATIC
BATCH (BatchEn = 1).
(2) "Allocated"
This area shows if the block is currently in use by SIMATIC BATCH (Occupied = 1).
(3) "Batch name"
This area shows the name of the batch that is currently running (Batchname).
(4) "Batch ID"
This area shows the identification number of the batch that is currently running (BatchID).
The batch view is disabled if BatchID = 16#00000000.
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Operating the "Batch" button in
the toolbar
0
1
Icon of the "Batch" button in the
toolbar
Disabled
Enabled
2
33