Preview Of Lut400 - Siemens SITRANS PCS 7 Function Manual

SITRANS LUT400
6.1 Lut400
(2) Service
You can select the following functions in this area:
● "Bypass"
● "Simulation"
● "Release for maintenance"
For more information about this area, refer to the following sections of the APL Online Help:
● Bypassing signals
● Simulating signals
● Release for maintenance
(3) Enabled operations
This area shows all operations for which special operator authorizations are assigned. They
depend on the configuration in the engineering system (ES) that applies to this block.
Symbols for enabled operations:
● Green check mark: The OS operator can control this parameter
● Gray check mark: the OS operator cannot control this parameter at this time due to the
process
● Red cross: the OS operator cannot control this parameter due to the configured AS operator
control permissions (OS_Perm or OS1Perm).
6.1.9.5

Preview of Lut400

180
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11