Limit View Of Sitranst - Siemens SITRANS PCS 7 Function Manual

(16) Bar graph for the gradient (4 to 20 mA signal)
This area shows the current gradient value in the form of a bar graph. The visible area in the bar
graph depends on the configuration in the engineering system (ES), see Display and operating
range for process values and limits.
(14) and (18) Limit display
These small, colored triangles indicate the specified limits in the respective bar graph.
(16) Display of gradient (4 to 20 mA signal)
The gradient monitoring is displayed when the gradient value PV_Grad0 ≠ 0.
(17) Bar graph for the "Process value" (4 to 20 mA signal)
This area shows the current "Process value" (4 to 20 mA signal) in the form of a bar graph. The
visible area in the bar graph depends on the configuration in the engineering system (ES), see
Display and operating range for process values and limits.
See also
Views of SitransT (Page 350)
9.1.9.3

Limit view of SitransT

The process value limits of the 4 to 20 mA signal can be specified in this view.
(1) Process value limits
In this area, you can enter the limits for the process value. You can change the following limits:
● "H alarm": High alarm
● "H warning": High warning
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS T
9.1 SitransT
353