Module errors
If an incorrect module ID of the connected DP slave is read from the block, output QModF will
be set. The Quality Codes are set to 16#00 as with the higher-level error.
5.3.5
Messaging of FbMag6T
Messaging
This block does not offer messaging.
5.3.6
I/Os of FbMag6T
Input parameters
Parameter
AVolFlow
Addr
SubnTyp
RackF
SelStrInputs
SetTot1
ModeTot1
SetTot2
ModeTot2
DCtr
DSetP
QCDSetP
DComp
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Description
Volume flow (AI) address
Addresses in the process image
1 = external DP interface
1 = DP slave failure (rack fault)
0 = I/O output data originate from the
CyclData structure
1= I/O output data originate from inputs
SetTot1/2, ModeTot1/2, DCtr, DSetP,
DComp and their QualityCodes
Totalizer 1: 16#01 = Reset command
transferred to the module (SET_TOT
from HW Config)
Totalizer 1: Command transferred to
the module (MODE_TOT from HW Con‐
fig)
Totalizer 2: 16#01 = reset command
output to the module (SET_TOT from
HW Config)
Totalizer 2: Command transferred to
the module (MODE_TOT from HW Con‐
fig)
Dosing unit: Command transferred to
the module (B_CTR from HW Config):
Setpoint of the dosing unit (SETP)
Signal status for the setpoint of the dos‐
ing unit
Compensation of the dosing unit
(COMP)
SITRANS F M MAG 6000
Type
Default
INT
-1
STRUCT
-1
1)
BOOL
0
BOOL
0
BOOL
0
BYTE
16#16#0000
BYTE
16#00
BYTE
16#00
BYTE
16#00
BYTE
16#00
REAL
0.0
BYTE
16#00
REAL
0.0
5.3 FbMag6T
143